1023E Sub-Compact Tractor
1023E Sub-Compact Tractor
1023E Sub-Compact Tractor
1023E Sub-Compact Tractor
  • 0% for 60 Months!

  • $500 Off!

  • Powerful Final Tier 4-compliant diesel engine

  • Auto-Connect™ mid-mower deck can be installed or removed in less than 5 minutes

  • $99 monthly payment option


Apply For Credit

Features

  • 2WD or 4WD: 4WD

  • Transmission Type: Hydrostatic - 2 Range

  • PTO HP: 15.3

  • Cab or Open Station: Open Station

  • HP: 22.4*

  • 3PT Hitch: Category 1

Specifications

3-point hitch - Lift capacity, 24-in. behind link arms:
344 kg
758 lb
3-point hitch - Type:
Limited Category 1
Dimensions - Approximate shipping weight (open-station; cab):
Open station: 656 kg
1446 lb
Cab: Not applicable
Dimensions - Front axle clearance:
195 mm
7.7 in.
Dimensions - Limited slip differential:
No
Dimensions - Turning radius without brakes:
Outside front tire: 2.51 m
8.2 ft
Dimensions - Wheelbase:
1450 mm
57.1 in.
Electrical - Alternator (12-V):
40 amp
Electrical - Battery size:
500 CCA
Electrical - Starter size:
1.2 kW
1.6 hp
Engine - Air cleaner:
Dual element
Engine - Aspiration:
Natural
Engine - Bore and stroke:
74 x 77 mm
2.91 x 3.03 in.
Engine - Compression ratio:
23.5:1
Engine - Cooling system:
Water pump
Engine - Cylinder liners:
Cast-In-Block
Engine - Cylinders/displacement:
Three cylinders: 0.993 L
60.6 cu in.
Engine - Emissions compliance:
Final Tier 4
Engine - Engine model:
3TNM74F-NCJT
Engine - Engine power (gross):
SAE J1995 rated power: 16 kW
21.5 hp
21.8 PS
Engine - Engine torque at rated speed:
47.7 Nm
35.2 lb-ft
Engine - Fuel tank capacity:
24 L
6.3 U.S. gal.
Engine - Injection pump type:
Indirect Injection
Engine - Lubrication:
Pressurized
Engine - Manufacturer:
Yanmar®
Engine - Number of cylinders:
Three
Engine - Power take-off (PTO) power:
11.1 kW
14.9 hp
Engine - Rated engine speed:
3200 rpm
Engine - Type:
Diesel
Final drive - Differential lock:
Yes
Final drive - Type:
Spur gear
Fluid capacities - Crankcase with filter:
2.7 L
2.9 qt
Fluid capacities - Transmission and hydraulic system:
12.3 L
3.2 gal.
Fuel system - Fuel consumption:

Fuel system - Type:
Indirect Injection
Hydraulics - Draft control sensing:
Select Control
Hydraulics - Maximum operating pressure:
138 bar
2000 psi
Hydraulics - Pump rated output:
Steering
13.2 L/min
3.5 gpm
Implement
13.2 L/min
3.5 gpm
24 L/min
6.3 gpm
Hydraulics - Pump type:
Single gear
Hydraulics - Remote control valves available:
Three
Hydraulics - Type:
Open Center
Key Specs - Approximate shipping weight (open-station; cab):
Open station: 656 kg
1446 lb
Cab: Not applicable
Key Specs - Cruise control:
No
Key Specs - Engine power (gross):
SAE J1995 rated power: 16 kW
21.5 hp
21.8 PS
Key Specs - Hitch type:
Limited Category 1
Key Specs - Implement hydraulics:
13.2 L/min
3.5 gpm
Key Specs - Lift capacity, 24-in. behind link arms:
344 kg
758 lb
Key Specs - Power take-off (PTO) power:
11.1 kW
14.9 hp
Key Specs - Standard transmission; forward/reverse:
Hydrostatic - two range
Key Specs - Steering hydraulics:
13.2 L/min
3.5 gpm
Key Specs - Wheelbase:
1450 mm
57.1 in.
Miscellaneous - Toolbox:
Yes
Operator station - Gear shift location - console/floor:
Left-hand side
Operator station - Platform - flat/straddle:
One-piece semi flat
Operator station - Rollover protective structure:
Type
Foldable
Yes
Power take-off (PTO) - Brake (for mid and rear PTO):
Wet disk
Power take-off (PTO) - Clutch:
Wet disk
Power take-off (PTO) - Control:
Independent
Power take-off (PTO) - Standard:
Rear: 540 rpm
Mid: 2100 rpm
Tires - Front:
R3 Turf: 18x8.50-10
R4: 18x8.5-10
Tires - Front tread range:
931 mm
36.7 in.
Tires - Rear:
R3 Turf: 26x12-12
R4: 26x12-12
Tires - Rear tread spacing:
895 mm
35.2 in.
Transmission - Axle capacity:
Front
612 kg
1349 lb
Rear
715 kg
1576 lb
Transmission - Brakes:
Wet disc (left-hand pedal)
Transmission - Creeper:
No
Transmission - Cruise control:
No
Transmission - Differential lock:
Yes
Transmission - Final drive:
Spur gear
Transmission - Left-hand reverser:
No
Transmission - Standard transmission; forward/reverse:
Hydrostatic - two range
Transmission - Steering:
Power

Excellent maneuverability and easy operation with standard four-wheel drive (4WD) and power steering

Standard 4WD and power steering make 1 Family Tractors excellent for mowing Standard 4WD and power steering make 1 Family Tractors excellent for mowing

Both 4WD and power steering are standard equipment on the 1 Family Tractors. This combination allows for excellent maneuverability and ease of operation.

  • Narrow overall width allows you to work in tight areas where most compact tractors just cannot fit. The 144.8-cm (57-in.) wheel base and 119.4 cm (47 in.) overall width gives great stability for all types of terrain.
  • Power steering means fewer turns of the steering wheel than manual steering, which is especially valuable when mowing around obstacles or during front loader work.
  • High horsepower-to-weight ratio makes the 1 Family Tractors a good choice for a variety of tasks. The overall tractor weight reduces ground compaction and makes them excellent for mowing.
  • The fully-independent power take-off (PTO) allows engaging and disengaging of the PTO without stopping tractor movement. This is important when driving across obstacles such as driveways while mowing.

Flexibility in operation with multiple mid-mower lift system options

Mid-mower lift system options Mid-mower lift system options
Mid-mower lift system options

Standard mechanical mower lift
 
The standard mechanical mower lift system moves the mower in conjunction with the rear implements and comes factory-installed on 1 Family Tractors.


 
Optional hydraulic mower lift
 
The optional hydraulic mower lift system allows the mower to be raised and lowered independently of the rear implements. It uses the loader joystick to lift and lower the mower deck.


 
Optional independent hydraulic mower lift
 
The optional independent hydraulic lift system allows the mower to be raised and lowered independently of the rear and front implements. It operates using a rocker switch mounted on the tractor, located at the operator’s left knee.

 

For more information on this mid mower lift system click here.

Quickly and easily change speed and directions with Twin Touch foot controls and Hydrostatic transmission (HST)

Twin Touch™ pedals Twin Touch™ pedals

The hydrostatic transmission’s infinite ground speeds and direction of travel are both controlled with the Twin Touch foot pedals.

  • Ideal for loader or mower applications where frequent direction and speed changes are needed
  • No clutching for fast direction changes
  • Match the job at hand with infinite ground speeds

Comfortable and convenient open operator’s station

Open operator's station (1025R shown) Open operator's station (1025R shown)

The 1023E open operator station is designed for greater comfort and increased visibility.

 

Comfortable operation  

  • Thick, textured rubber floor mat reduces vibrations and absorbs shock and noise.
  • Step-through flat platform and fender-mounted handrails make it easy to get on and off the tractor from either side.
  • Controls are conveniently located next to the fenders and are color-coded for quick identification.
  • Easy-lift hood with dual gas-charged lift struts as standard equipment. A simple flip of the latch lets you open the rugged composite hood, providing wide open access to the engine compartment.
  • Foldable rollover protective structure (ROPS) keeps you protected during operation and improves the ability to store tractor in a garage.
Foldable Roll-Gard ROPS Foldable Roll-Gard ROPS

Foldable Roll-Gard™ ROPS is standard equipment on 1023E.

Increased visibility
Standard (and optional) lighting shown Standard (and optional) lighting shown
  • Sloping hood design provides improved visibility especially during front loader work
  • Standard lighting equipment allows you to work from early in the morning to late at night:
    • Two front-mounted sealed-beam halogen headlights
    • Two amber-flashing warning/hazard lights mounted on the side of the ROPS with reflectors
    • Built-in tail light on one warning/hazardous light
    • Additional front- and rear-light kits are available

Spend more time working and less time switching equipment with easy implement swaps

Drive-over deck makes connection simple Drive-over deck makes connection simple

1 Family Tractors are designed to minimize the time and effort needed to switch-out implements to accommodate different jobs.

 

  • AutoConnect Deck System: Connect a mid-mount mower deck to the tractor in less than 60 seconds without leaving the seat except to lock the gauge wheels.
    • Load-N-Go attachment: Easily move your 54D or 60D Autoconnect Deck with your John Deere Loader after it has been disconnected from the tractor with the Load-N-Go ramps.
  • Quik-Park™ Loader System: 120R Quik-Park™ Loaders are designed for easy mounting and removal in about a minute, with no tools needed.
  • Quik-Tatch™ front hitch: Save time switching front implements like a snow blower, rotary broom, or front blade without tools.
  • iMatch™ quick-hitch: Easily hookup Category 1 implements in seconds using three fixed points to back in and pick up rear implements without leaving the seat
    • Position control hitch: Set the rear hitch height and then consistently lower the hitch to the exact height every time, which is especially useful in grading and leveling applications.
  • Quik-Knect™ system: Connect power take-off (PTO)-driven implements quickly and with low physical effort. The Quik-Knect system utilizes one connector for the tractor’s PTO shaft and a designated connector for each implement which eliminates twisting and forcing splines to align.

 

1 Family Tractors can have up to three implements mounted simultaneously due to standard dual selective control valves (SCVs), allowing you to switch from using one implement to another without stopping to adjust. When a third SCV kit is added, the number of possible combinations is greatly increased.

  • Features

    Features

    • 2WD or 4WD: 4WD

    • Transmission Type: Hydrostatic - 2 Range

    • PTO HP: 15.3

    • Cab or Open Station: Open Station

    • HP: 22.4*

    • 3PT Hitch: Category 1

  • Specifications

    Specifications

    3-point hitch - Lift capacity, 24-in. behind link arms:
    344 kg
    758 lb
    3-point hitch - Type:
    Limited Category 1
    Dimensions - Approximate shipping weight (open-station; cab):
    Open station: 656 kg
    1446 lb
    Cab: Not applicable
    Dimensions - Front axle clearance:
    195 mm
    7.7 in.
    Dimensions - Limited slip differential:
    No
    Dimensions - Turning radius without brakes:
    Outside front tire: 2.51 m
    8.2 ft
    Dimensions - Wheelbase:
    1450 mm
    57.1 in.
    Electrical - Alternator (12-V):
    40 amp
    Electrical - Battery size:
    500 CCA
    Electrical - Starter size:
    1.2 kW
    1.6 hp
    Engine - Air cleaner:
    Dual element
    Engine - Aspiration:
    Natural
    Engine - Bore and stroke:
    74 x 77 mm
    2.91 x 3.03 in.
    Engine - Compression ratio:
    23.5:1
    Engine - Cooling system:
    Water pump
    Engine - Cylinder liners:
    Cast-In-Block
    Engine - Cylinders/displacement:
    Three cylinders: 0.993 L
    60.6 cu in.
    Engine - Emissions compliance:
    Final Tier 4
    Engine - Engine model:
    3TNM74F-NCJT
    Engine - Engine power (gross):
    SAE J1995 rated power: 16 kW
    21.5 hp
    21.8 PS
    Engine - Engine torque at rated speed:
    47.7 Nm
    35.2 lb-ft
    Engine - Fuel tank capacity:
    24 L
    6.3 U.S. gal.
    Engine - Injection pump type:
    Indirect Injection
    Engine - Lubrication:
    Pressurized
    Engine - Manufacturer:
    Yanmar®
    Engine - Number of cylinders:
    Three
    Engine - Power take-off (PTO) power:
    11.1 kW
    14.9 hp
    Engine - Rated engine speed:
    3200 rpm
    Engine - Type:
    Diesel
    Final drive - Differential lock:
    Yes
    Final drive - Type:
    Spur gear
    Fluid capacities - Crankcase with filter:
    2.7 L
    2.9 qt
    Fluid capacities - Transmission and hydraulic system:
    12.3 L
    3.2 gal.
    Fuel system - Fuel consumption:

    Fuel system - Type:
    Indirect Injection
    Hydraulics - Draft control sensing:
    Select Control
    Hydraulics - Maximum operating pressure:
    138 bar
    2000 psi
    Hydraulics - Pump rated output:
    Steering
    13.2 L/min
    3.5 gpm
    Implement
    13.2 L/min
    3.5 gpm
    24 L/min
    6.3 gpm
    Hydraulics - Pump type:
    Single gear
    Hydraulics - Remote control valves available:
    Three
    Hydraulics - Type:
    Open Center
    Key Specs - Approximate shipping weight (open-station; cab):
    Open station: 656 kg
    1446 lb
    Cab: Not applicable
    Key Specs - Cruise control:
    No
    Key Specs - Engine power (gross):
    SAE J1995 rated power: 16 kW
    21.5 hp
    21.8 PS
    Key Specs - Hitch type:
    Limited Category 1
    Key Specs - Implement hydraulics:
    13.2 L/min
    3.5 gpm
    Key Specs - Lift capacity, 24-in. behind link arms:
    344 kg
    758 lb
    Key Specs - Power take-off (PTO) power:
    11.1 kW
    14.9 hp
    Key Specs - Standard transmission; forward/reverse:
    Hydrostatic - two range
    Key Specs - Steering hydraulics:
    13.2 L/min
    3.5 gpm
    Key Specs - Wheelbase:
    1450 mm
    57.1 in.
    Miscellaneous - Toolbox:
    Yes
    Operator station - Gear shift location - console/floor:
    Left-hand side
    Operator station - Platform - flat/straddle:
    One-piece semi flat
    Operator station - Rollover protective structure:
    Type
    Foldable
    Yes
    Power take-off (PTO) - Brake (for mid and rear PTO):
    Wet disk
    Power take-off (PTO) - Clutch:
    Wet disk
    Power take-off (PTO) - Control:
    Independent
    Power take-off (PTO) - Standard:
    Rear: 540 rpm
    Mid: 2100 rpm
    Tires - Front:
    R3 Turf: 18x8.50-10
    R4: 18x8.5-10
    Tires - Front tread range:
    931 mm
    36.7 in.
    Tires - Rear:
    R3 Turf: 26x12-12
    R4: 26x12-12
    Tires - Rear tread spacing:
    895 mm
    35.2 in.
    Transmission - Axle capacity:
    Front
    612 kg
    1349 lb
    Rear
    715 kg
    1576 lb
    Transmission - Brakes:
    Wet disc (left-hand pedal)
    Transmission - Creeper:
    No
    Transmission - Cruise control:
    No
    Transmission - Differential lock:
    Yes
    Transmission - Final drive:
    Spur gear
    Transmission - Left-hand reverser:
    No
    Transmission - Standard transmission; forward/reverse:
    Hydrostatic - two range
    Transmission - Steering:
    Power
  • Details

    Excellent maneuverability and easy operation with standard four-wheel drive (4WD) and power steering

    Standard 4WD and power steering make 1 Family Tractors excellent for mowing Standard 4WD and power steering make 1 Family Tractors excellent for mowing

    Both 4WD and power steering are standard equipment on the 1 Family Tractors. This combination allows for excellent maneuverability and ease of operation.

    • Narrow overall width allows you to work in tight areas where most compact tractors just cannot fit. The 144.8-cm (57-in.) wheel base and 119.4 cm (47 in.) overall width gives great stability for all types of terrain.
    • Power steering means fewer turns of the steering wheel than manual steering, which is especially valuable when mowing around obstacles or during front loader work.
    • High horsepower-to-weight ratio makes the 1 Family Tractors a good choice for a variety of tasks. The overall tractor weight reduces ground compaction and makes them excellent for mowing.
    • The fully-independent power take-off (PTO) allows engaging and disengaging of the PTO without stopping tractor movement. This is important when driving across obstacles such as driveways while mowing.

    Flexibility in operation with multiple mid-mower lift system options

    Mid-mower lift system options Mid-mower lift system options
    Mid-mower lift system options

    Standard mechanical mower lift
     
    The standard mechanical mower lift system moves the mower in conjunction with the rear implements and comes factory-installed on 1 Family Tractors.


     
    Optional hydraulic mower lift
     
    The optional hydraulic mower lift system allows the mower to be raised and lowered independently of the rear implements. It uses the loader joystick to lift and lower the mower deck.


     
    Optional independent hydraulic mower lift
     
    The optional independent hydraulic lift system allows the mower to be raised and lowered independently of the rear and front implements. It operates using a rocker switch mounted on the tractor, located at the operator’s left knee.

     

    For more information on this mid mower lift system click here.

    Quickly and easily change speed and directions with Twin Touch foot controls and Hydrostatic transmission (HST)

    Twin Touch™ pedals Twin Touch™ pedals

    The hydrostatic transmission’s infinite ground speeds and direction of travel are both controlled with the Twin Touch foot pedals.

    • Ideal for loader or mower applications where frequent direction and speed changes are needed
    • No clutching for fast direction changes
    • Match the job at hand with infinite ground speeds

    Comfortable and convenient open operator’s station

    Open operator's station (1025R shown) Open operator's station (1025R shown)

    The 1023E open operator station is designed for greater comfort and increased visibility.

     

    Comfortable operation  

    • Thick, textured rubber floor mat reduces vibrations and absorbs shock and noise.
    • Step-through flat platform and fender-mounted handrails make it easy to get on and off the tractor from either side.
    • Controls are conveniently located next to the fenders and are color-coded for quick identification.
    • Easy-lift hood with dual gas-charged lift struts as standard equipment. A simple flip of the latch lets you open the rugged composite hood, providing wide open access to the engine compartment.
    • Foldable rollover protective structure (ROPS) keeps you protected during operation and improves the ability to store tractor in a garage.
    Foldable Roll-Gard ROPS Foldable Roll-Gard ROPS

    Foldable Roll-Gard™ ROPS is standard equipment on 1023E.

    Increased visibility
    Standard (and optional) lighting shown Standard (and optional) lighting shown
    • Sloping hood design provides improved visibility especially during front loader work
    • Standard lighting equipment allows you to work from early in the morning to late at night:
      • Two front-mounted sealed-beam halogen headlights
      • Two amber-flashing warning/hazard lights mounted on the side of the ROPS with reflectors
      • Built-in tail light on one warning/hazardous light
      • Additional front- and rear-light kits are available

    Spend more time working and less time switching equipment with easy implement swaps

    Drive-over deck makes connection simple Drive-over deck makes connection simple

    1 Family Tractors are designed to minimize the time and effort needed to switch-out implements to accommodate different jobs.

     

    • AutoConnect Deck System: Connect a mid-mount mower deck to the tractor in less than 60 seconds without leaving the seat except to lock the gauge wheels.
      • Load-N-Go attachment: Easily move your 54D or 60D Autoconnect Deck with your John Deere Loader after it has been disconnected from the tractor with the Load-N-Go ramps.
    • Quik-Park™ Loader System: 120R Quik-Park™ Loaders are designed for easy mounting and removal in about a minute, with no tools needed.
    • Quik-Tatch™ front hitch: Save time switching front implements like a snow blower, rotary broom, or front blade without tools.
    • iMatch™ quick-hitch: Easily hookup Category 1 implements in seconds using three fixed points to back in and pick up rear implements without leaving the seat
      • Position control hitch: Set the rear hitch height and then consistently lower the hitch to the exact height every time, which is especially useful in grading and leveling applications.
    • Quik-Knect™ system: Connect power take-off (PTO)-driven implements quickly and with low physical effort. The Quik-Knect system utilizes one connector for the tractor’s PTO shaft and a designated connector for each implement which eliminates twisting and forcing splines to align.

     

    1 Family Tractors can have up to three implements mounted simultaneously due to standard dual selective control valves (SCVs), allowing you to switch from using one implement to another without stopping to adjust. When a third SCV kit is added, the number of possible combinations is greatly increased.

Other 1-Family Compact Tractors Models

Related Inventory For Sale

Contact

Contact

Consignment

Request a Service

×

Sloan Implement Employee Portal

×

Your session will expire in . If you want to reset this timer, please click OK.