DM50 Series Disc Mowers
  • Rope System transport latch
  • Quick-remove shear hub assembly
  • DM5050 & 5060 iMatch and Quick Coupler compatible
  • DM5070 Cat. 2 Quick Coupler compatible

Features

  • PTO HP: 40 hp (29.4 kW)

  • Cutting Width: 6 ft. 6 in. (2.0 m)

  • Hitch: Cat. 1 or 2

Specifications

Cutterbar - Lift mechanism:
Hydraulic
Cutting discs - Quantity:
Six
Cutting discs - rpm:
3,000 rpm
Dimensions - Cutting width:
2.36 m
7.7 ft
Dimensions - Operation of cutting angle:
+/- 25 degree (angle)
Dimensions - Swath width:
1.75 m
5.7 ft
Hitch - Category:
Category 1, Category 2 - iMatch and Quick-Coupler compatible
Hitch - Type:
3-point
Knives - Quantity:
12
Set-up time (per unit) - Labor hours:
1
Tractor compatibility - Minimum PTO:
PTO drive rpm
540 rpm
33.6 kW
45 PTO hp
V-belts with tensioner - Quantity:
Four
Warranty - Time period:
1 year
Weight - Per machine:
442 kg
975 lb
Weight - Shipping (1 unit and crate):
998 kg
2,200 lb

Transport lock system

DM50 in transport position DM50 in transport position
DM50 in operating position DM50 in operating position

The transport lock system is a simple mechanical system that saves time and ensures safety. Use the rope system to raise the transport lock, engage selective control valve (SCV) 1 to bring the cutterbar into the transport position, and release the rope system to lock for transport.  

Shear hub assembly serviceability

Oval-shaped disc removed Oval-shaped disc removed
#

Cutterbar serviceability is easier on the DM50 Series Disc Mowers. Remove the oval-shaped disc(s) with only four bolts per disc. The shear hub assembly can be serviced by removing the remaining four bolts. This will save time and oil replacement costs by not splitting the entire cutterbar to replace the sheared hubs as required in previous models. 

Shear hub assembly on DM50 Series Shear hub assembly on DM50 Series
Shear hub assembly on DM50 Series Shear hub assembly on DM50 Series

Take the shear hub assembly off the cutterbar by removing only eight bolts.

Outer swath wheel

Outer swath wheel Outer swath wheel
#

Add the outer swath wheel to the DM50 Series Disc Mower to achieve separation between cut and uncut crop. By keeping the cut crop out of the uncut crop, cutting is not happening twice, which would reduce overall productivity. The swath wheel is fully adjustable up and down the length of the cutterbar, and it bolts directly to the top frame with U-bolts.

Simple float spring tension adjustment

DM50 Series float spring tension adjustment DM50 Series float spring tension adjustment
#

Set the float spring to get maximum performance during operation. Adjust properly so the down pressure does not damage crop stubble as the skid shoes pass through the field.

Park stand and arm system

Park stand in park position Park stand in park position
Park stand in operating position Park stand in operating position

The DM50 Series Disc Mower park stand and parking arm work together to transfer the mower’s weight to the cutterbar while in the parked position. This makes the attachment process easier, saving time and frustration.

Park arm in park position Park arm in park position
Park arm in operating position Park arm in operating position
  • Features

    Features

    • PTO HP: 40 hp (29.4 kW)

    • Cutting Width: 6 ft. 6 in. (2.0 m)

    • Hitch: Cat. 1 or 2

  • Specifications

    Specifications

    Cutterbar - Lift mechanism:
    Hydraulic
    Cutting discs - Quantity:
    Six
    Cutting discs - rpm:
    3,000 rpm
    Dimensions - Cutting width:
    2.36 m
    7.7 ft
    Dimensions - Operation of cutting angle:
    +/- 25 degree (angle)
    Dimensions - Swath width:
    1.75 m
    5.7 ft
    Hitch - Category:
    Category 1, Category 2 - iMatch and Quick-Coupler compatible
    Hitch - Type:
    3-point
    Knives - Quantity:
    12
    Set-up time (per unit) - Labor hours:
    1
    Tractor compatibility - Minimum PTO:
    PTO drive rpm
    540 rpm
    33.6 kW
    45 PTO hp
    V-belts with tensioner - Quantity:
    Four
    Warranty - Time period:
    1 year
    Weight - Per machine:
    442 kg
    975 lb
    Weight - Shipping (1 unit and crate):
    998 kg
    2,200 lb
  • Details

    Transport lock system

    DM50 in transport position DM50 in transport position
    DM50 in operating position DM50 in operating position

    The transport lock system is a simple mechanical system that saves time and ensures safety. Use the rope system to raise the transport lock, engage selective control valve (SCV) 1 to bring the cutterbar into the transport position, and release the rope system to lock for transport.  

    Shear hub assembly serviceability

    Oval-shaped disc removed Oval-shaped disc removed
    #

    Cutterbar serviceability is easier on the DM50 Series Disc Mowers. Remove the oval-shaped disc(s) with only four bolts per disc. The shear hub assembly can be serviced by removing the remaining four bolts. This will save time and oil replacement costs by not splitting the entire cutterbar to replace the sheared hubs as required in previous models. 

    Shear hub assembly on DM50 Series Shear hub assembly on DM50 Series
    Shear hub assembly on DM50 Series Shear hub assembly on DM50 Series

    Take the shear hub assembly off the cutterbar by removing only eight bolts.

    Outer swath wheel

    Outer swath wheel Outer swath wheel
    #

    Add the outer swath wheel to the DM50 Series Disc Mower to achieve separation between cut and uncut crop. By keeping the cut crop out of the uncut crop, cutting is not happening twice, which would reduce overall productivity. The swath wheel is fully adjustable up and down the length of the cutterbar, and it bolts directly to the top frame with U-bolts.

    Simple float spring tension adjustment

    DM50 Series float spring tension adjustment DM50 Series float spring tension adjustment
    #

    Set the float spring to get maximum performance during operation. Adjust properly so the down pressure does not damage crop stubble as the skid shoes pass through the field.

    Park stand and arm system

    Park stand in park position Park stand in park position
    Park stand in operating position Park stand in operating position

    The DM50 Series Disc Mower park stand and parking arm work together to transfer the mower’s weight to the cutterbar while in the parked position. This makes the attachment process easier, saving time and frustration.

    Park arm in park position Park arm in park position
    Park arm in operating position Park arm in operating position

Contact

Contact

Consignment

Request a Service

×

Sloan Implement Employee Portal

×

Your session will expire in . If you want to reset this timer, please click OK.