John Deere 400E Loader

[THYMELEAF ERROR] #strings.defaultString(image.file.altText, Make.title) returns: Exception evaluating OGNL expression: "#strings.defaultString(image.file.altText, Make.title)"
Make John Deere
Model 400E
Type Front End Loaders for Tractors

How can we help?


Description

  • Compatible with 4M and 4R Series Tractors
  • Rigid mounted with parking kit available
  • Easy maintenance points keeps you on the job
  • 1,760 pounds (800 kg) lift capacity

Models

Parking stand kit

With the BW15872 parking stand kit, the 300E Loader can be quickly and easily removed from the tractor without tools.

 

Similarly, the BW16127 parking stand kit allows for the 400E Loader to be parked from the tractor.

 

Instructions for attaching the loader

 

Instructions for detaching the loader

 

The kit includes the following:

  • Parking stands
  • Handled pins
  • Hydraulic hoses
  • Quick-couplers
  • Mounting bracket and hardware
Parking stand installed Parking stand installed
Quick disconnect connected Quick disconnect connected
Boom pins installed Boom pins installed
End-of-pin lubrication means easy maintenance
Close up of grease fitting Close up of grease fitting
Pivot point grease fitting locations (400X shown) Pivot point grease fitting locations (400X shown)

All pivot points on the loader have grease fittings that are accessible from the side of the loader to make greasing the loader much easier, ensuring that all grease points are more likely to be serviced.  No more searching for grease points that are hard to find.  Removing the grease gun from the grease fitting is not a problem as sufficient radius has been left to allow the grease gun tip to be rotated to the side for removal from the fitting.

Specifications

  • Key Specs - Boom breakout force: Measured at pivot (Y)<br/>1743.7 kg<br/>3853 lb<br/>Measured at 500 mm ahead of pivot (Z)<br/>1315.4 kgf<br/>2902 lbf<br/>
  • Key Specs - Bucket rollback force capacity: At ground-level line (ZZ)<br/>3485 lb<br/>1580 kg<br/>
  • Key Specs - Clearance at full height - bucket dumped (C): 2298 mm<br/>90.4 in.
  • Key Specs - Dump angle, degrees (E): 42 degree (angle)
  • Key Specs - Lift capacity at full height: Measured at pivot (U)<br/>1087 kg<br/>2396 lb<br/>Measured at 500 mm ahead of pivot (V)<br/>800 kg<br/>1764 lb<br/>
  • Key Specs - Maximum lift height (A): 2850 mm<br/>112.1 in.
  • Key Specs - Rollback angle, degrees (G): 28.6 degree (angle)
  • Loader - Base weight: 150.99 kg
  • Loader - Boom breakout force: Measured at pivot (Y)<br/>1743.7 kg<br/>3853 lb<br/>Measured at 500 mm ahead of pivot (Z)<br/>1315.4 kg<br/>2902 lb<br/>
  • Loader - Bucket angle: Dump angle, degrees (E)<br/>42 degree (angle)<br/>Rollback angle, degrees (G)<br/>28.6 degree (angle)<br/>Dump angle, ground<br/>128.2 degree (angle)<br/>
  • Loader - Bucket rollback force capacity: At maximum height (VV)<br/>1866.1 kg<br/>4112 lb<br/>At 59-in. (1500-mm) lift height (XX)<br/>2355.1 kg<br/>5191 lb<br/>At ground-level line (ZZ)<br/>3487 kg<br/>1580.6 lb<br/>
  • Loader - Bucket used: Materials
  • Loader - Bucket weight: 108 kg<br/>238 lb
  • Loader - Cycle times: Loader raise, seconds<br/>4.26 seconds<br/>Loader lower, seconds<br/>3.13 seconds<br/>Bucket dump, seconds<br/>3.14 seconds<br/>Bucket rollback, seconds<br/>2.42 seconds<br/>
  • Loader - Digging depth (H): -146 mm<br/>5.7 in.
  • Loader - Dimensions: Maximum lift height (A)<br/>2850 mm<br/>112.1 in.<br/>At full height - bucket level(B)<br/>2646 mm<br/>104.1 in.<br/>At full height - bucket dumped (C)<br/>2298 mm<br/>90.4 in.<br/>
  • Loader - Lift capacity at 59 in. (1500 mm): Measured at pivot (W)<br/>1307 kg<br/>2881 lb<br/>Measured at 500 mm ahead of pivot (X)<br/>1043 kg<br/>2299 lb<br/>
  • Loader - Lift capacity at full height: Measured at pivot (U)<br/>1087 kg<br/>2396 lb<br/>Measured at 500 mm ahead of pivot (V)<br/>800 kg<br/>1764 lb<br/>
  • Loader - Overall height in carry position (J): 1.5 m<br/>4.94 ft
  • Loader - Overall length (I+F), ft (m): 3.522 m<br/>11.5 ft
  • Loader - Reach: At maximum height (D)<br/>705 mm<br/>27.7 in.<br/>At ground level - bucket level (F)<br/>1672 mm<br/>65.8 in.<br/>
  • Tractor - Front tire: 25x10-16.5 4PR R4
  • Tractor - Model: 4044M, 4049M, 4052M, 4066M and OOS: 4044R, 4049R, 4052R, 4066R
  • Tractor - Pump capacity: 10.2 gpm
  • Tractor - Rated pressure: 2500 psi
  • Tractor - Rear tire: 16.9-24 4PR
  • Tractor - Wheelbase: 1850 mm<br/>73 in.

Features

  • Lift Height: 112 in. (2.850 m)
  • Lift Capacity: 1,760 lbs (800 kg)

Copy Set

Parking stand kit

With the BW15872 parking stand kit, the 300E Loader can be quickly and easily removed from the tractor without tools.

 

Similarly, the BW16127 parking stand kit allows for the 400E Loader to be parked from the tractor.

 

Instructions for attaching the loader

 

Instructions for detaching the loader

 

The kit includes the following:

  • Parking stands
  • Handled pins
  • Hydraulic hoses
  • Quick-couplers
  • Mounting bracket and hardware
Parking stand installed Parking stand installed
Quick disconnect connected Quick disconnect connected
Boom pins installed Boom pins installed

End-of-pin lubrication means easy maintenance

Close up of grease fitting Close up of grease fitting
Pivot point grease fitting locations (400X shown) Pivot point grease fitting locations (400X shown)

All pivot points on the loader have grease fittings that are accessible from the side of the loader to make greasing the loader much easier, ensuring that all grease points are more likely to be serviced.  No more searching for grease points that are hard to find.  Removing the grease gun from the grease fitting is not a problem as sufficient radius has been left to allow the grease gun tip to be rotated to the side for removal from the fitting.

Contact

Contact

Consignment

Request a Service

×

Sloan Implement Employee Portal

×

Your session will expire in . If you want to reset this timer, please click OK.