H160 Loader
  • Compatible with 3R Series Tractors
  • Quik-Park™ mounting system for efficient attachment and removal
  • Easy maintenance for increased uptime
  • 999 pounds (453 kg) lift capacity

Specifications

Key Specs - Boom breakout force:
Measured at pivot (Y)
1295 kgf
2855 lbf
Measured at 500 mm ahead of pivot (Z)
922 kgf
2032 lbf
Key Specs - Bucket rollback force capacity:
At ground-level line (ZZ)
1188 kgf
2619 lbf
Key Specs - Clearance at full height - bucket dumped (C):
1743 mm
68.6 in.
Key Specs - Dump angle, degrees (E):
43 degree (angle)
Key Specs - Lift capacity at full height:
Measured at pivot (U)
617 kgf
1360 lbf
Measured at 500 mm ahead of pivot (V)
453 kgf
999 lbf
Key Specs - Maximum lift height (A):
2284 mm
90 in.
Key Specs - Rollback angle, degrees (G):
25 degree (angle)
Loader - Base weight:
257.21 kg
Loader - Boom breakout force:
Measured at pivot (Y)
1295 kgf
2855 lbf
Measured at 500 mm ahead of pivot (Z)
922 kgf
2032 lbf
Loader - Bucket angle:
Dump angle, degrees (E)
43 degree (angle)
Rollback angle, degrees (G)
25 degree (angle)
Loader - Bucket rollback force capacity:
At maximum height (VV)
1205 kgf
2657 lbf
At 59-in. (1500-mm) lift height (XX)
1518 kgf
3347 lbf
At ground-level line (ZZ)
1188 kgf
2619 lbf
Loader - Bucket weight:
93.8 kg
206.8 lb
Loader - Cycle times:
Loader raise, seconds
2.76 seconds
Loader lower, seconds
1.69 seconds
Bucket dump, seconds
2.91 seconds
Bucket rollback, seconds
1.72 seconds
Loader - Digging depth (H):
76 mm
2.9 in.
Loader - Dimensions:
Maximum lift height (A)
2284 mm
90 in.
At full height - bucket level(B)
83.5 in.
2123 mm
At full height - bucket dumped (C)
1743 mm
68.6 in.
Loader - Lift capacity at 59 in. (1500 mm):
Measured at pivot (W)
771 kgf
1700 lbf
Measured at 500 mm ahead of pivot (X)
595 kgf
1312 lbf
Loader - Lift capacity at full height:
Measured at pivot (U)
617 kgf
1360 lbf
Measured at 500 mm ahead of pivot (V)
453 kgf
999 lbf
Loader - Overall length (I+F), ft (m):
3.122 m
10.24 ft
Loader - Reach:
At maximum height (D)
773 mm
30.4 in.
At ground level - bucket level (F)
1381 mm
54.4 in.
Tractor - Front tire:
7.00-14 6PR R1
Tractor - Model:
3120/3320/3520/3720
Tractor - Pump capacity:
8.6 gpm
Tractor - Rated pressure:
2500 psi
Tractor - Rear tire:
11.2-24 6PR R1
Tractor - Wheelbase:
1727 mm
68 in.

End-of-pin lubrication means easy maintenance

Close up of grease fitting Close up of grease fitting
Pivot point grease fitting locations Pivot point grease fitting locations

All pivot points on the loader have grease fittings that are accessible from the side of the loader to make greasing the loader much easier, ensuring that all grease points are more likely to be serviced. No more searching for grease points that are hard to find. Removing the grease gun from the grease fitting or zerk is not a problem either as sufficient radius has been left to allow the grease gun tip to be rotated to the side for removal from the fitting or zerk.

Quik-Park™ loader mounting system

Quik-Park loader mounting system Quik-Park loader mounting system

The H-Series Loaders are designed for easy removal and mounting to and from the tractor without tools.

The parking stand, attached to the front frame of the tractor, is an integral part of the loader during loader operation.

The parking stand lowers into position by moving the joystick to the raised position once the latches are opened. This allows the loader to move to the parked position.

To view a video of how the Quik-Park™ system works click here.

NOTE: This video only shows the dismount and mount of the loader without disconnecting the hydraulics. To completely remove the loader, the operator must turn the tractor off, relieve the hydraulics, and then disconnect the hoses from the couplers.

  • Specifications

    Specifications

    Key Specs - Boom breakout force:
    Measured at pivot (Y)
    1295 kgf
    2855 lbf
    Measured at 500 mm ahead of pivot (Z)
    922 kgf
    2032 lbf
    Key Specs - Bucket rollback force capacity:
    At ground-level line (ZZ)
    1188 kgf
    2619 lbf
    Key Specs - Clearance at full height - bucket dumped (C):
    1743 mm
    68.6 in.
    Key Specs - Dump angle, degrees (E):
    43 degree (angle)
    Key Specs - Lift capacity at full height:
    Measured at pivot (U)
    617 kgf
    1360 lbf
    Measured at 500 mm ahead of pivot (V)
    453 kgf
    999 lbf
    Key Specs - Maximum lift height (A):
    2284 mm
    90 in.
    Key Specs - Rollback angle, degrees (G):
    25 degree (angle)
    Loader - Base weight:
    257.21 kg
    Loader - Boom breakout force:
    Measured at pivot (Y)
    1295 kgf
    2855 lbf
    Measured at 500 mm ahead of pivot (Z)
    922 kgf
    2032 lbf
    Loader - Bucket angle:
    Dump angle, degrees (E)
    43 degree (angle)
    Rollback angle, degrees (G)
    25 degree (angle)
    Loader - Bucket rollback force capacity:
    At maximum height (VV)
    1205 kgf
    2657 lbf
    At 59-in. (1500-mm) lift height (XX)
    1518 kgf
    3347 lbf
    At ground-level line (ZZ)
    1188 kgf
    2619 lbf
    Loader - Bucket weight:
    93.8 kg
    206.8 lb
    Loader - Cycle times:
    Loader raise, seconds
    2.76 seconds
    Loader lower, seconds
    1.69 seconds
    Bucket dump, seconds
    2.91 seconds
    Bucket rollback, seconds
    1.72 seconds
    Loader - Digging depth (H):
    76 mm
    2.9 in.
    Loader - Dimensions:
    Maximum lift height (A)
    2284 mm
    90 in.
    At full height - bucket level(B)
    83.5 in.
    2123 mm
    At full height - bucket dumped (C)
    1743 mm
    68.6 in.
    Loader - Lift capacity at 59 in. (1500 mm):
    Measured at pivot (W)
    771 kgf
    1700 lbf
    Measured at 500 mm ahead of pivot (X)
    595 kgf
    1312 lbf
    Loader - Lift capacity at full height:
    Measured at pivot (U)
    617 kgf
    1360 lbf
    Measured at 500 mm ahead of pivot (V)
    453 kgf
    999 lbf
    Loader - Overall length (I+F), ft (m):
    3.122 m
    10.24 ft
    Loader - Reach:
    At maximum height (D)
    773 mm
    30.4 in.
    At ground level - bucket level (F)
    1381 mm
    54.4 in.
    Tractor - Front tire:
    7.00-14 6PR R1
    Tractor - Model:
    3120/3320/3520/3720
    Tractor - Pump capacity:
    8.6 gpm
    Tractor - Rated pressure:
    2500 psi
    Tractor - Rear tire:
    11.2-24 6PR R1
    Tractor - Wheelbase:
    1727 mm
    68 in.
  • Details

    End-of-pin lubrication means easy maintenance

    Close up of grease fitting Close up of grease fitting
    Pivot point grease fitting locations Pivot point grease fitting locations

    All pivot points on the loader have grease fittings that are accessible from the side of the loader to make greasing the loader much easier, ensuring that all grease points are more likely to be serviced. No more searching for grease points that are hard to find. Removing the grease gun from the grease fitting or zerk is not a problem either as sufficient radius has been left to allow the grease gun tip to be rotated to the side for removal from the fitting or zerk.

    Quik-Park™ loader mounting system

    Quik-Park loader mounting system Quik-Park loader mounting system

    The H-Series Loaders are designed for easy removal and mounting to and from the tractor without tools.

    The parking stand, attached to the front frame of the tractor, is an integral part of the loader during loader operation.

    The parking stand lowers into position by moving the joystick to the raised position once the latches are opened. This allows the loader to move to the parked position.

    To view a video of how the Quik-Park™ system works click here.

    NOTE: This video only shows the dismount and mount of the loader without disconnecting the hydraulics. To completely remove the loader, the operator must turn the tractor off, relieve the hydraulics, and then disconnect the hoses from the couplers.

Related Inventory For Sale

Contact

Contact

Consignment

Request a Service

×

Sloan Implement Employee Portal

×

Your session will expire in . If you want to reset this timer, please click OK.